P1.4 Cable in the instrument, power on, install workstations, and connect to LBT network

• Phase : 1
• Status : Draft
• Category : Unpack, Assemble, Verification, and Installation (C1)
• Recurrence : once
• Duration : half a day

Description

• At the LBT clean room, cable in the instrument. Power on the cabinets, install workstations, and connect SHARK-NIR to LBT network.

Prerequisites

• All the necessary tools and safety features to do the cabling. A free and accessible network port to connect SHARK-NIR to LBT network.

Procedure

• Carefully cable in SHARK-NIR.
• Switch on the electronics cabinets.
• Install the instrument workstation in the server room and scientific camera workstation in control room level 2.
• Install the scientific camera workstation in control room level 2.
• Connect SHARK-NIR to the LBT network.

Success criteria

• Electronics cabinets are powered on (working of led lights, fans, etc.).
• SHARK-NIR can be accessed through LBT network (e.g. Switching on/off services remotely from the control room).

Notes LBTO support

• IT Support to connect to the LBT network.
• Any electronics support needed?

Associated SHARK-NIR personnel

Date performed and by whom