P1.4 Cable in the instrument, power on, install workstations, and connect to LBT network

• Phase : 1
• Status : Draft
• Category : Unpack, Assemble, and Verification (C1)
• Recurrence : once
• Duration : 1 day

Description

• At the LBT clean room, cable in the instrument. Power on the electronics, install workstations (in the server room) and connect SHARK-NIR to the LBT network.

Prerequisites

• Presence of all the necessary tools and safety features to do the cabling. A free and accessible network port to connect SHARK-NIR to the LBT network.

Procedure

• Carefully cable in SHARK-NIR.
• Switch on the electronics.
• Install the instrument workstation (and its copy/backup) and the scientific camera (SCICAM) workstation in the server room.
• Connect SHARK-NIR to the LBT network.
• Ready essential laptops ready with all the relevant software for the cleanroom activity. Check the connection with both the workstations mentioned earlier.

Templates

Success criteria

• Electronics is powered on (working of led lights, fans, etc.).
• SHARK-NIR can be accessed through the LBT network (e.g. Switching on/off services remotely from the control room).

Notes

• SCICAM is redundant with other SCICAM computers inside of LBTI. There will not be a separate SCICAM workstation copy/backup.

LBTO support

• We need one free and accessible network port to connect SHARK-NIR to the LBT network.
• IT support to install/set the workstations in the proper location, connect to the LBT network.
• LBTO SW support may be needed.

Date performed and by whom