Changes between Version 14 and Version 15 of docs/CommissioningPlan/P1.2

Timestamp:

01/14/22 12:28:03 (3 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/P1.2

@@ -1 @@
-== P1.2 Opening boxes, their visual inspection, and mounting the units on the handling ==
-•       **Phase**               :       1  
-•       **Status**              :       Draft    
-•       **Category**            :       Unpack, Assemble, and Verification (C1)
-•       **Recurrence**  :       once
-•       **Duration**            :       1 day
+== P1.2 Opening of boxes in LBT Hall, inspection of the contents and installation on units on their handlings ==
+- **Phase** :   1  
+- **Status** :  Draft    
+- **Category** :        Unpack, Assemble, and Verification (C1)
+- **Recurrence** :      once
+- **Duration** :        1 day
 **Description**
-•       Unpack the containers/boxes carefully and visually inspect the components inside
+- Unpack the containers/boxes carefully and visually inspect the components inside
 **Prerequisites**
-•       All the necessary tools and safety features to do the unpacking and moving.  
+- All the necessary tools and safety features to do the unpacking and moving.  
 **Procedure**
-•       Carefully unpack the containers/boxes containing the SHARK-NIR opto-mechanical components. 
-•       Visually inspect if all the contents are safe and secure.
-* Inspect if the tilt and shock sensors are activated or not.
-•       Check if there is any damage to any part of the shipment. If yes, note them, take photos, and communicate to the respective insurance party (if needed).
-* Set up the handlings for the cryostat and the optical bench. install the corresponding onto the handling and move to the cleanroom. 
+- Carefully unpack the containers/boxes containing the SHARK-NIR opto-mechanical components. 
+- Visually inspect if all the contents are safe and secure.
+- Inspect if the tilt and shock sensors are activated or not.
+- Check if there is any damage to any part of the shipment. If yes, note them, take photos, and communicate to the respective insurance party (if needed).
+- Set up the handlings for the cryostat and the optical bench. install the corresponding onto the handling and move to the cleanroom. 
+**Templates**
 
 **Success criteria**
-•       No damage to any container or boxes. 
-* No shock sensors activated.
+- No damage to any container or boxes. 
+- No shock sensors activated.
 **Notes**
 
 **LBTO support**
-•       Crane operator (mountain bay) to lift and move stuff.
-* 1-2 crew to support unpacking and moving.
-**Associated SHARK-NIR personnel**
-•       
+- Crane operator (mountain bay) to lift and move stuff.
+- 1-2 crew to support unpacking and moving.
 **Date performed and by whom**
 
-**Comments**