Changes between Version 2 and Version 3 of docs/CommissioningPlan/SDC7

Timestamp:

01/14/22 13:17:45 (3 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/SDC7

@@ -1 +1 @@
  == SDC7 Spectral resolution == 
-•       **Phase**               :       Any  
-•       **Status**              :       Draft    
-•       **Category**            :       Daytime calibration (C3)
-•       **Recurrence**  :       once every month starting from commissioning.
-•       **Duration**            :       10 minutes
+
+- **Phase**             :       Any  
+- **Status**            :       Draft    
+- **Category**  :       Daytime calibration (C3)
+- **Recurrence**        :       once every month starting from commissioning.
+- **Duration**  :       20 minutes
+
 **Description**
-•       Measure the spectral resolution for the LSS observing mode.
+- Measure the spectral resolution for the LSS observing mode.
+
 **Prerequisites**
-•       Bad pixel map, Background frames 
+- Bad pixel map, Background frames 
+
 **Procedure**
-•       This calibration is performed illuminating the slit with the instrument spectral calibration lamps with known characteristics (5 emission lines). A background with lamps switched off is required.
+- This calibration is performed illuminating the slit with the instrument spectral calibration lamps with known characteristics (5 emission lines). A background with lamps switched off is required.
+
 **Success criteria**
-•       Accuracy of MRS: 0.5nm at 1.2 micron, LRS: 2 nm at 1.2 micron. 
+- Accuracy of MRS: 0.5 nm at 1.2 um, LRS: 2 nm at 1.2 um. 
+
+**Templates**
+
 **Notes**
-•       Same as activity 9.4 in AD4
+- Same as activity 9.4 in AD4
+
 **LBTO support**
 
-**Associated SHARK-NIR personnel**
-
 **Date performed and by whom**
-
-**Comments**
-
-MB: If this happens in clean room at LBT, it might not be repeated in daytime commissioning, correct? maybe put 20 minutes
--