Changes between Version 17 and Version 18 of docs/CommissioningPlan/P2.4

Timestamp:

09/07/22 20:25:05 (2 years ago)

Author:

lmarafatto

Comment:

--

docs/CommissioningPlan/P2.4

@@ -15 +15 @@
 
 **Procedure**
-- Since SHARK-NIR has the same focal station as LBTI, the telescope is set to the LBTI collimation model to start the alignment of SHARK-NIR to the telescope.
-- Using ARGOS on-axis calibration light source, IN_TT and Dichroic (of the deployable arm) are moved to have the on-axis spot on the reference position on SCICAM (and TECCAM), identified during the internal alignment of the instrument.
-- TBD
+- Since SHARK-NIR has the same focal station as LBTI, the telescope is set to the LBTI collimation model to start the alignment of SHARK-NIR to the telescope. Verify on LMIRCAM if the PSF generated by ARGOS on-axis light source is on the hot-pixel
+- Using ARGOS on-axis calibration light source, IN_TT and Dichroic (of the deployable arm) are moved to have the on-axis PSF and the pupil (i.e., the ASM footprint) on the reference position on SCICAM (and TECCAM), within a few pixels, identified during the internal alignment of the instrument.
+- SHARK-NIR focus alignment is done applying defocus to the ASM.
 - At the end of the alignment, check that our deployable arm, when un-deployed, does not vignette any of the technical FoV of LBTI (which is 120 more or less). Need to confirm if this activity can be performed only at night (authorize LBTI night collimation).
 
 **Templates**
-- SHARKNIR_gen_tec_PSFAlignment (not released)
+- SHARKNIR_gen_tec_PSFAlignment (released)
 - SHARKNIR_gen_tec_PupilApoAlignment (released)
 - SHARKNIR_gen_tec_PupilLyotAlignment (released)
@@ -27 +27 @@
 **Success criteria**
 - On-axis spot from the ARGOS light source at the reference pixel of the SCICAM.
+- Pupil image (ASM footprint) from ARGOS light source co-centered with the internal pupil of SHARK-NIR
 - The daytime SHARK-NIR collimation model is recorded.
 - Something with LBTI?
@@ -32 +33 @@
 
 **Notes**
-- For some reason, if the Argos swing arm calibration source is not good enough, we need to mount RR on the SX side and use that source.
+- For some reason, if the Argos swing arm calibration source is not good enough, we need to mount RR with NIRVANA Barilotto on the SX side and use that source.
 - If needed, we can move the SOUL-WFS in x-y-z axes.