== P2.0	Installation of SHARK-NIR at the LBT platform - 2== 
•	**Phase**		:	2  
•	**Status**		: 	Draft	 
•	**Category**		:	Installation of SHARK-NIR at LBT platform (C2)	
•	**Recurrence**	: 	once (unless deemed necessary to remove SHARK-NIR from the telescope platform)
•	**Duration**		: 	2 days.
**Description**
•	Installation of the electronics cabinets, cabling, and confirming the safety & security of the instrument and area.
**Prerequisites**
•	SHARK-NIR (main parts) are installed on the LBTO platform (P2.0A).
**Procedure**
•	Look at AD4 document for the procedure and details.
**Success criteria**
•	SHARK-NIR successfully installed at the LBT platform.
•	Telescope is balanced. 
•	Connect all the cables and secure them.
•	Reassure all the connections, nuts and bolts, etc.
* Confirm the safety and scuory of the instrument and the area.
**Notes**
Note that one (or two) rack(s) of the SHARK-NIR electronics are installed within the LBTO electronics cabinets (shared with LBTI and iLocater).

**LBTO support**
•	Crew members' support for the preparation, lift-off, and installation of SHARK-NIR electronics cabinet
* Crane operator (mountain bay, LBT platform)
* Safety officer
* Working platform installed in front of the Gregorian focal-station SX, 
* Hatch door SX on the UIAP platform removed ???
* kindly check the installation document for more details

**Associated SHARK-NIR personnel**

**Date performed and by whom**

**Comments**

LM: this seems to be a duplicate of 2.0A. Please check.