Changes between Version 11 and Version 12 of docs/CommissioningPlan/P1.7

Timestamp:

01/11/22 10:53:46 (3 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/P1.7

@@ -1 @@
- == P1.7        Check the working of the internal NCPA routine == 
-•       **Phase**               :       2  
+== P1.7 Motor/light sources functional verification and filter artifacts/defects verification == 
+•       **Phase**               :       1  
 •       **Status**              :       Draft    
 •       **Category**            :       Unpack, Assemble, and Verification (C1)
-•       **Recurrence**  :       once at commissioning
-•       **Duration**            :       0.5 day
+•       **Recurrence**  :       once
+•       **Duration**            :       1.5
 **Description**
-•       Check the working of the internal NCPA routine (phase diversity + wollastone (DI-DBI))
-
+•       Checking the working of motors and light sources within SHARK-NIR using optical feedback. Finding the filter defects/artifacts using an internal calibration source (flat-field) within the instrument.
 **Prerequisites**
-•       SCICAM cooled down.
-
+•       SHARK-NIR connected to LBT network.
+•       Electronics racks on.
+•       DM best shape uploaded (shape minimizing internal aberrations)
+•       The cryostat should be running and cooled down.
 **Procedure**
-•       Run the Phase-diversity routine using the images taken with the SHARK-NIR internal calibration sources to measure the NCPA within (excluding the deployable arm)
+•       When the services are up and running, after the motors are homed, each of the individual motors is individually tested for their different named/nominal positions. 
+•       The light sources within SHARK-NIR are used simultaneously to check the working of the motors looking at the optical feedback.
+* Check the CRED-2 and ALPAO-DM SW and optical feedback.
+* Take the images of all the filters using the internal calibration source (flat-field) within the instrument to locate/find out the filter defects/artifacts, if any. You may take short- and long-exposures to get better contrast of the features if required.
+* Check the filter wheel position monitoring script detailed in [wiki:/docs/Commissioning/SNM1 SNM1]. Save the data in the repository.
 
 **Success criteria**
-* Internal NCPA routine works fine and the PSF shows improvement in its quality.
+•       All the motors can reach the named positions / nominal positions.
+•       All the light sources are working and confirmed through optical feedback at the SCICAM.
+* Filter wheel position monitoring script is run successfully and data saved in the repository.
+* CRED-2 AND ALPAO-DM working normally.
+•       All the filter images saved.
 
 **Notes**
@@ -21 +30 @@
 **LBTO support**
 * Liquid Nitrogen refill is required in the cleanroom.
-
 **Associated SHARK-NIR personnel**
 
 **Date performed and by whom**
 
+
 **Comments**
-