Changes between Version 18 and Version 19 of docs/CommissioningPlan/P1.5

Timestamp:

01/14/22 12:42:27 (3 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/P1.5

@@ -1 @@
-== P1.5 Start all the services and initialize all the motors == 
-•       **Phase**               :       1  
-•       **Status**              :       Draft    
-•       **Category**            :       Unpack, Assemble, and Verification (C1) 
-•       **Recurrence**  :       once
-•       **Duration**            :       1 day
+== P1.5 SW checks and motors initializations == 
+
+- **Phase**             :       1  
+- **Status**            :       Draft    
+- **Category**  :       Unpack, Assemble, and Verification (C1) 
+- **Recurrence**        :       once
+- **Duration**  :       1 day
+
 **Description**
-•       When the electronics are switched on, verify individual services working and initialize the motors, send to nominal positions, etc. 
+- When the electronics are switched on, verify individual services working and initialize the motors, send to nominal positions, etc. 
+
 **Prerequisites**
-•       SHARK-NIR connected to the LBT network (P1.4 should be completed).
-•       Electronics on.
-•       A script to initialize the motors.
+- SHARK-NIR connected to the LBT network (P1.4 should be completed).
+- Electronics on.
+- A script to initialize the motors.
+
 **Procedure**
-•       Switch on the electronics cabinets and individual components.
-•       Start individual services.
-•       Initialize all motors together (using the buttons in the final SW GUI).
-* Check also the button which puts every moving component in their resting positions.
-* Check in the final version of the SW GUI if the individual initialization buttons work.
-* Check if the SW (HW if present and need to be checked) limit switches are triggered and check the logs.
-* Check if the SW part of switching ON and OFF lamps in the calibration unit works.
-* Check the electronics/SW of the CRED-2 and ALPAO-DM (& RTC). Make sure that they both can be individually switched on and off remotely.
-* Start the SCICAM electronics and acquire (and store) an image in warm conditions.
+- Switch on the electronics cabinets and individual components.
+- Start individual services.
+- Initialize all motors together (using the buttons in the final SW GUI).
+- Check also the button which puts every moving component in their resting positions.
+- Check in the final version of the SW GUI if the individual initialization buttons work.
+- Check if the SW (HW if present and need to be checked) limit switches are triggered and check the logs.
+- Check if the SW part of switching ON and OFF lamps in the calibration unit works.
+- Check the electronics/SW of the CRED-2 and ALPAO-DM (& RTC). Make sure that they both can be individually switched on and off remotely.
+- Start the SCICAM electronics and acquire (and store) an image in warm conditions.
+
+**Templates**
 
 **Success criteria**
-•       All the services are up and running with no fatal errors and understand the errors or warnings if any.
-•       All the motors are working, initialized, and sent to the nominal positions.
-* CRED-2 and ALPAO-DM electronics and SW working as expected. 
+- All the services are up and running with no fatal errors and understand the errors or warnings if any.
+- All the motors are working, initialized, and sent to the nominal positions.
+- CRED-2 and ALPAO-DM electronics and SW working as expected. 
+
 **Notes**
-
-**Templates**
-- 
 
 **LBTO support**
 
-**Associated SHARK-NIR personnel**
-
 **Date performed and by whom**
-
-
-**Comments**