Changes between Version 16 and Version 17 of docs/CommissioningPlan/P1.5

Timestamp:

02/03/21 11:45:51 (4 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/P1.5

@@ -6 +6 @@
 •       **Duration**            :       1 day
 **Description**
-•       When the electronics cabinets are switched on, verify individual services working and initialize the motors to nominal positions. 
+•       When the electronics are switched on, verify individual services working and initialize the motors, send to nominal positions, etc. 
 **Prerequisites**
 •       SHARK-NIR connected to the LBT network (P1.4 should be completed).
-•       Electronics cabinets on.
+•       Electronics on.
 •       A script to initialize the motors.
 **Procedure**
@@ -18 +18 @@
 * Check in the final version of the SW GUI if the individual initialization buttons work.
 * Check if the SW (HW if present and need to be checked) limit switches are triggered and check the logs.
-* Check the electronics/SW of the CRED-2 and ALPAO-DM. Make sure that they both can be individually switched on and off remotely.
+* Check if the SW part of switching ON and OFF lamps in the calibration unit works.
+* Check the electronics/SW of the CRED-2 and ALPAO-DM (& RTC). Make sure that they both can be individually switched on and off remotely.
 * Start the SCICAM electronics and acquire (and store) an image in warm conditions.
 
@@ -24 +25 @@
 •       All the services are up and running with no fatal errors and understand the errors or warnings if any.
 •       All the motors are working, initialized, and sent to the nominal positions.
-* CRED-2 and ALPAO-DM electronics and SW working as expected.
+* CRED-2 and ALPAO-DM electronics and SW working as expected. 
 **Notes**
 
@@ -35 +36 @@
 
 **Comments**
-* LM: add in the procedure also starting of SCICAM electronics and try to acquire and store an image (in warm conditions of course) [DONE]