== P1.4 Cable in the instrument, power on, install workstations, and connect to LBT network == 
•	**Phase**		:	1  
•	**Status**		: 	Draft	 
•	**Category**		: 	Unpack, Assemble, and Verification (C1)
•	**Recurrence**	: 	once
•	**Duration**		: 	half a day
**Description**
•	At the LBT clean room, cable in the instrument. Power on the cabinets, install workstations, and connect SHARK-NIR to the LBT network.
**Prerequisites**
•	All the necessary tools and safety features to do the cabling. A free and accessible network port to connect SHARK-NIR to the LBT network.
**Procedure**
•	Carefully cable in SHARK-NIR.
•	Switch on the electronics.
•	Install the instrument workstation (and its copy/backup) and the scientific camera (SCICAM) workstation in the server room.
•	Connect SHARK-NIR to the LBT network.
*  Ready essential laptops ready with all the relevant software for the cleanroom activity. Check the connection with both the workstations mentioned earlier.
**Success criteria**
•	Electronics is powered on (working of led lights, fans, etc.).
•	SHARK-NIR can be accessed through the LBT network (e.g. Switching on/off services remotely from the control room).
**Notes**

**LBTO support**
•	IT Support to connect to the LBT network.
• SW support may be needed. 
**Associated SHARK-NIR personnel**

**Date performed and by whom**

**Comments**
* for MM: check back up for SCICAM workstation.