== P1.4 Cable in the instrument, power on, and connect to LBT network == 
•	**Phase**		:	1  
•	**Status**		: 	Draft	 
•	**Category**		: 	Installation, integration, verification (C1)				
•	**Recurrence**	: 	once
•	**Duration**		: 	2 hour(s)
**Description**
•	At the LBT clean room, cable in the instrument. Power on the cabinets, and connect SHARK-NIR to LBT network.
**Prerequisites**
•	All the necessary tools and safety features to do the cabling. A free and accessible network port to connect SHARK-NIR to LBT network.
**Procedure**
•	Carefully cable in SHARK-NIR.
•	Switch on the electronics cabinets.
•	Connect SHARK-NIR to the LBT network.
**Success criteria**
•	Electronics cabinets are powered on (working of led lights, fans, etc.).
•	SHARK-NIR can be accessed through LBT network (e.g. Switching on/off services remotely from the control room).
**Notes**
**LBTO support**
•	Support to connect to LBT network.
•	Any electronics support needed? 
**Associated SHARK-NIR personnel**
•	JF, LM, MdP, 
**Date performed and by whom**