Changes between Version 16 and Version 17 of docs/CommissioningPlan/P1.4

Timestamp:

01/14/22 12:38:07 (3 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/P1.4

@@ -1 +1 @@
 == P1.4 Cable in the instrument, power on, install workstations, and connect to LBT network == 
-•       **Phase**               :       1  
-•       **Status**              :       Draft    
-•       **Category**            :       Unpack, Assemble, and Verification (C1)
-•       **Recurrence**  :       once
-•       **Duration**            :       1 day
+- **Phase** :   1  
+- **Status** :  Draft    
+- **Category** :        Unpack, Assemble, and Verification (C1)
+- **Recurrence** :      once
+- **Duration** :        1 day
+
 **Description**
-•       At the LBT clean room, cable in the instrument. Power on the electronics, install workstations and connect SHARK-NIR to the LBT network.
+- At the LBT clean room, cable in the instrument. Power on the electronics, install workstations and connect SHARK-NIR to the LBT network.
+
 **Prerequisites**
-•       All the necessary tools and safety features to do the cabling. A free and accessible network port to connect SHARK-NIR to the LBT network.
+- All the necessary tools and safety features to do the cabling. A free and accessible network port to connect SHARK-NIR to the LBT network.
+
 **Procedure**
-•       Carefully cable in SHARK-NIR.
-•       Switch on the electronics.
-•       Install the instrument workstation (and its copy/backup) and the scientific camera (SCICAM) workstation in the server room.
-•       Connect SHARK-NIR to the LBT network.
-*  Ready essential laptops ready with all the relevant software for the cleanroom activity. Check the connection with both the workstations mentioned earlier.
+- Carefully cable in SHARK-NIR.
+- Switch on the electronics.
+- Install the instrument workstation (and its copy/backup) and the scientific camera (SCICAM) workstation in the server room.
+- Connect SHARK-NIR to the LBT network.
+- Ready essential laptops ready with all the relevant software for the cleanroom activity. Check the connection with both the workstations mentioned earlier.
+
+**Templates**
+
 **Success criteria**
-•       Electronics is powered on (working of led lights, fans, etc.).
-•       SHARK-NIR can be accessed through the LBT network (e.g. Switching on/off services remotely from the control room).
+- Electronics is powered on (working of led lights, fans, etc.).
+- SHARK-NIR can be accessed through the LBT network (e.g. Switching on/off services remotely from the control room).
+
 **Notes**
-* SCICAM is redundant with other SCICam computers inside of LBTI. There will not be a separate SCICAM workstation copy/backup.
+- SCICAM is redundant with other SCICam computers inside of LBTI. There will not be a separate SCICAM workstation copy/backup.
+
 **LBTO support**
-* IT support to install/set the workstations in the proper location, connect to the LBT network.
-* LBTO SW support may be needed.
-**Associated SHARK-NIR personnel**
+- IT support to install/set the workstations in the proper location, connect to the LBT network.
+- LBTO SW support may be needed.
 
 **Date performed and by whom**
 
-**Comments**
-