P1.3 Install the instrument in the cleanroom with its electronics cabinet

• Phase : 1
• Status : Draft
• Category : Unpack, Assemble, Verification, and Installation (C1)
• Recurrence : once
• Duration : half a day

Description

• Install and integrate the different SHARK-NIR opto-mechanical components onto the mechanical structure. Install the electronics cabinets. Move the unit to the cleanroom.

Prerequisites

• All the necessary tools and safety features to do the installation, integration, and moving to the cleanroom. The mechanical structure to hold SHARK-NIR at the cleanroom should be assembled and ready to be used (with the possibility to move to the cleanroom).

Procedure

• Carefully assemble and integrate the various opto-mechanical components.
• Install them one by one onto the mechanical structure (either at mountain bay or at the cleanroom).
• Before installing the motor electronics rack in the cleanroom, take it to the LBT Platform cabinet (its final destination) shared with iLocator for sanity checks.
• Install the electronics cabinet.

Success criteria

• The SHARK-NIR is primarily assembled on to the mechanical structure.
• Electronics cabinets are installed.

Notes

LBTO support

• Crane operator to lift and move stuff.
• 1-2 crew to support installation on the mechanical structure.
• Access to the LBTO electronics cabinet where the motor rack of SHARK-NIR will be installed.

Associated SHARK-NIR personnel

Date performed and by whom

Comments

MB: when saying optomech components you mean cryostat to bearing for example? [Yes, for example]