Changes between Version 22 and Version 23 of docs/CommissioningPlan/P1.3

Timestamp:

02/14/22 14:47:26 (3 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/P1.3

@@ -7 +7 @@
 
 **Description**
-- Install and integrate the different SHARK-NIR opto-mechanical components onto the mechanical structure. Install the electronics cabinets, and move the unit to the cleanroom.
+- Install and integrate the different SHARK-NIR opto-mechanical components onto the mechanical structure. Install the electronics into a temporary rack, and move the unit to the cleanroom.
 
 **Prerequisites**
@@ -14 +14 @@
 **Procedure**
 - Carefully integrate the cryostat unit with the derotator-optical bench unit.
-- Before installing the motor electronics rack in the cleanroom, take it to the LBT Platform cabinet (its final destination) shared with iLocater for sanity checks. 
+- Before installing the electronics into a temporary rack in the cleanroom, take it to the LBT Platform cabinet at Level-6 (its final destination) shared with iLocater for sanity checks. 
 - Set up the electronics racks in the cleanroom.
 
@@ -29 +29 @@
 **LBTO support**
 - Crane operator to lift and move stuff (mountain bay and/or cleanroom).
+- Forklift to move boxes.
 - 1-2 crew to support installation procedure (mountain bay and/or cleanroom).
 - Access to the LBTO electronics cabinet where the motor rack of SHARK-NIR will be installed.
 - Optical bench and access to the clean tent.
+- If LBTO has an electronics rack available to mount the SHARK-NIR electronics for the duration from unboxing to installation at the telescope platform, SHARK-NIR can avoid shipping what we have from Padova. What we have in Padova has the following dimensions 58cm x 71cm x 185cm approximately, but a shorter one would still be acceptable for us. Below is the photo of our rack in Padova.
+
+[[Image(Shark-nir_ElectronicsRack_Padova.JPEG,50%)]]
 
 **Date performed and by whom**