Changes between Version 9 and Version 10 of docs/CommissioningPlan/P1.10

Timestamp:

01/11/22 10:54:14 (3 years ago)

Author:

kradhakrishnan

Comment:

--

docs/CommissioningPlan/P1.10

@@ -1 @@
-== P1.10        Verification of the operability of the motors & light sources and looking for filter defects/artifacts == 
-•       **Phase**               :       1  
+ == P1.10       NCPA routine verification == 
+•       **Phase**               :       2  
 •       **Status**              :       Draft    
 •       **Category**            :       Unpack, Assemble, and Verification (C1)
-•       **Recurrence**  :       once
-•       **Duration**            :       1.5
+•       **Recurrence**  :       once at commissioning
+•       **Duration**            :       0.5 day
 **Description**
-•       Checking the working of motors and light sources within SHARK-NIR using optical feedback. Finding the filter defects/artifacts using an internal calibration source (flat-field) within the instrument.
+•       Check the working of the internal NCPA routine (phase diversity + wollastone (DI-DBI))
+
 **Prerequisites**
-•       SHARK-NIR connected to LBT network.
-•       Electronics racks on.
-•       DM best shape uploaded (shape minimizing internal aberrations)
-•       The cryostat should be running and cooled down.
+•       SCICAM cooled down.
+
 **Procedure**
-•       When the services are up and running, after the motors are homed, each of the individual motors is individually tested for their different named/nominal positions. 
-•       The light sources within SHARK-NIR are used simultaneously to check the working of the motors looking at the optical feedback.
-* Check the CRED-2 and ALPAO-DM SW and optical feedback.
-* Take the images of all the filters using the internal calibration source (flat-field) within the instrument to locate/find out the filter defects/artifacts, if any. You may take short- and long-exposures to get better contrast of the features if required.
-* Check the filter wheel position monitoring script detailed in [wiki:/docs/Commissioning/SNM1 SNM1]. Save the data in the repository.
+•       Run the Phase-diversity routine using the images taken with the SHARK-NIR internal calibration sources to measure the NCPA within (excluding the deployable arm)
 
 **Success criteria**
-•       All the motors can reach the named positions / nominal positions.
-•       All the light sources are working and confirmed through optical feedback at the SCICAM.
-* Filter wheel position monitoring script is run successfully and data saved in the repository.
-* CRED-2 AND ALPAO-DM working normally.
-•       All the filter images saved.
+* Internal NCPA routine works fine and the PSF shows improvement in its quality.
 
 **Notes**
@@ -30 +21 @@
 **LBTO support**
 * Liquid Nitrogen refill is required in the cleanroom.
+
 **Associated SHARK-NIR personnel**
 
 **Date performed and by whom**
 
-
 **Comments**